DIY Guide to Installing PVC Tile Trim Like a Pro

  • By:jumidata
  • 2024-05-28
  • 10

Are you ready to transform your home’s flooring with the elegance of PVC tiles? While the tiles themselves are essential, the finishing touch that makes your project shine lies in the trim. Installing PVC tile trim may seem daunting, but with this step-by-step guide, you’ll become an expert in no time.

Materials You’ll Need:

– PVC tile trim

– Utility knife

– Miter saw

– Measuring tape

– Level

– Adhesive

– Caulk gun

– Caulk

Step 1: Measure and Cut the Tile Trim

Use the measuring tape to determine the length of the trim needed for each side of the room. Transfer these measurements to the PVC trim and mark the cut lines. Using a utility knife, carefully score and snap the trim along the marked lines.

Step 2: Create Mitered Corners

For inside corners, measure the distance from the inside edge of one wall to the inside edge of the opposite wall. Transfer this measurement to the PVC trim and mark the cut line. Use a miter saw to cut both pieces of trim at 45-degree angles. For outside corners, follow the same procedure, but cut the angles at 135 degrees.

Step 3: Apply Adhesive and Install the Trim

Apply a thin bead of adhesive along the back of the PVC trim. Carefully align the trim with the edge of the tiles and press firmly into place. Use a level to ensure the trim is installed straight.

Step 4: Secure the Corners

Place a small bead of adhesive on the mitered corners of the trim. Join the pieces together and hold them firmly for a few minutes to allow the adhesive to set.

Step 5: Caulk the Gaps

To create a seamless finish, caulk the gaps between the trim and the tiles. Use a caulk gun to apply a thin bead of caulk and smooth it out with your finger.

Pro Tips:

– Use a sharp blade for a clean cut.

– Dry-fit the trim before applying adhesive to ensure a proper fit.

– Wipe away excess adhesive immediately with a damp cloth.

– Allow 24 hours for the adhesive and caulk to fully cure before using the floor.

With these simple steps, you can install PVC tile trim like a pro and elevate the look of your flooring. So, gather your tools, follow this guide, and prepare to witness the transformation of your home!

Leave a Reply

Your email address will not be published. Required fields are marked *

Partner with Niuyuan, Your OEM Edging Trim Factory!
Talk To Us



Foshan Nanhai Niuyuan Hardware Products Co., Ltd.

We are always providing our customers with reliable products and considerate services.

    If you would like to keep touch with us directly, please go to contact us


      • 1
        Hey friend! Welcome! Got a minute to chat?
      Online Service