Easy Steps to Replace Old or Damaged Tile Corner Trim

  • By:jumidata
  • 2024-05-15
  • 4

Tired of old, chipped, or broken tile corner trim? Replacing it is an easy and budget-friendly home improvement project that can instantly refresh your space. Here’s a step-by-step guide to make it a breeze:

Gather Your Tools and Materials

Before you begin, gather the following tools and materials:

– Hammer or rubber mallet

– Flathead screwdriver or pry bar

– Utility knife or razor blade

– Grout saw

– New tile corner trim

– Thin-set mortar

– Grout

– Sponge

– Bucket

Remove the Old Trim

1. Protect your grout. Use duct tape or painter’s tape to protect the adjacent tiles and grout from damage.

2. Loosen the trim. Carefully insert the flathead screwdriver or pry bar under the edge of the trim and gently pry it loose.

3. Cut the grout. Use the grout saw to cut the grout along the edges of the trim.

4. Remove the trim. Once the grout is cut, use the hammer or rubber mallet to gently tap the trim until it dislodges.

Prepare the Surface

1. Clean the area. Remove any debris or old grout from the exposed area.

2. Apply thin-set mortar. Spread a thin layer of thin-set mortar onto the back of the new trim.

Install the New Trim

1. Position the trim.Align the new trim with the edge of the tiles and press it into place.

2. Tap it in. Use the hammer or rubber mallet to gently tap the trim until it is level and secure.

3. Smooth the edges. Use your finger or a grout float to smooth out the excess thin-set mortar around the edges.

Grout and Clean

1. Apply grout. Mix the grout according to the manufacturer’s instructions and apply it to the joints between the trim and the tiles.

2. Spread the grout. Use a grout float to spread the grout evenly and remove any excess.

3. Clean the surface. Once the grout has hardened slightly, use a damp sponge to clean the excess.

4. Remove the tape. Carefully remove the protective tape from the surrounding tiles and grout.

And there you have it! Replacing old or damaged tile corner trim is an easy and effective way to upgrade your space. With a little effort, you can have a refreshed and stylish look in no time.

Leave a Reply

Your email address will not be published. Required fields are marked *

Partner with Niuyuan, Your OEM Edging Trim Factory!
Talk To Us



Foshan Nanhai Niuyuan Hardware Products Co., Ltd.

We are always providing our customers with reliable products and considerate services.

    If you would like to keep touch with us directly, please go to contact us


      • 1
        Hey friend! Welcome! Got a minute to chat?
      Online Service