Step-by-Step- Installing Quarter Round Tile Trim for a Polished Finish

  • By:jumidata
  • 2024-05-31
  • 10

In the realm of home improvement, meticulousness and attention to detail can elevate a project from ordinary to extraordinary. One such aspect where precision and finesse matter significantly is installing quarter round tile trim. This article will provide a comprehensive guide to the step-by-step process of installing quarter round tile trim, ensuring a polished and professional finish.

Materials Required

Before embarking on the installation, gather the following essential materials:

Quarter round tile trim

Tile adhesive

Notched trowel


Grout float


Caulk gun


Surface Preparation

1. Ensure that the surface where the trim will be installed is clean, dry, and free of debris.

2. Use a level to check for any unevenness in the surface. If necessary, level the surface using a self-leveling compound.

3. Allow the surface to dry completely before proceeding with the installation.

Applying Tile Adhesive

1. Spread a thin layer of tile adhesive on the surface using the notched trowel.

2. Hold the quarter round trim against the surface and press firmly to ensure proper adhesion.

3. Remove any excess adhesive that may squeeze out from the edges using a damp sponge.


1. Allow the adhesive to dry completely as per the manufacturer’s instructions.

2. Mix the grout according to the package directions.

3. Using a grout float, apply the grout into the spaces between the trim and the surface.

4. Allow the grout to set for the recommended time, usually around 15-20 minutes.

5. Wipe away any excess grout using a damp sponge.

Sealing and Finishing

1. Apply a bead of caulk along the edges of the trim where it meets the surface.

2. Smooth out the caulk using a wet finger or a caulk finishing tool.

3. Allow the caulk to dry completely before using the surface.

Tips for a Polished Finish

Use a sharp razor blade to cut the trim precisely at the corners.

Align the trim carefully to ensure a seamless transition between the trim and the surface.

Wipe away excess adhesive and grout promptly to prevent staining.

Use a soft cloth to clean the finished surface regularly to maintain its polished look.

By following these steps diligently and paying attention to the details, you can successfully install quarter round tile trim and achieve a professional-looking finish that will enhance the aesthetics of your home.

Leave a Reply

Your email address will not be published. Required fields are marked *

Partner with Niuyuan, Your OEM Edging Trim Factory!
Talk To Us



Foshan Nanhai Niuyuan Hardware Products Co., Ltd.

We are always providing our customers with reliable products and considerate services.

    If you would like to keep touch with us directly, please go to contact us


      • 1
        Hey friend! Welcome! Got a minute to chat?
      Online Service