How to Fix Common Aluminum Tile Edge Trim Problems

Aluminum tile edging is a popular choice for finishing the edges of tiled surfaces. It’s durable, easy to clean, and available in a variety of finishes to match your decor. However, like any material, aluminum tile edging can sometimes present problems. Here are some of the most common problems and how to fix them:

Loose or damaged edge trim

If the edge trim is loose or damaged, it can pose a safety hazard. tripping and can also allow water to penetrate behind the tiles. To repair loose or damaged edges, follow these steps:

1. Remove the damaged trim. Use a putty knife or pry bar to gently remove the trim from the tile.

2. Clean the area where the trim was installed. Remove any old adhesive or dirt.

3. Apply new adhesive to the back of the new trim. Use construction adhesive specifically designed for use with aluminum.

4. Press the new trim into place. Make sure the trim is flush with the edge of the tile.

5. Allow the adhesive to dry completely. Refer to manufacturer’s instructions for drying time.

Discolored or stained edge trim

Aluminum tile edge trim may become discolored or stained with the weather. This may be due to exposure to dirt, water or chemicals. To clean discolored or stained edges, follow these steps:

1. Clean the upholstery with mild detergent and water. Use a soft cloth or sponge to avoid scratching the trim.

2. Rinse the filling with clean water.

3. Dry the trim with a clean cloth.

4. Apply metallic polish to the trim. This will help protect the trim from fading and future staining.

Cracked or broken edge trim

If the edge trim is cracked or broken, it will need to be replaced. To replace a cracked or broken edge trim, follow these steps:

1. Remove the damaged trim. Use a putty knife or pry bar to gently remove the trim from the tile.

2. Clean the area where the trim was installed. Remove any old adhesive or dirt.

3. Apply new adhesive to the back of the new trim. Use construction adhesive specifically designed for use with aluminum.

4. Press the new trim into place. Make sure the trim is flush with the edge of the tile.

5. Allow the adhesive to dry completely. Refer to the manufacturer’s instructions for drying times.

By following these tips, you can solve common problems with aluminum tile edging and keep your tiled surfaces looking their best.