Installation Tips for Metal Quarter Round Trim- A DIY Guide

  • By:jumidata
  • 2024-06-03
  • 13

Whether you’re a seasoned DIYer or a complete novice, installing metal quarter round trim can be a rewarding and functional addition to your home. This comprehensive guide will provide you with step-by-step instructions and expert tips to help you achieve professional-looking results.

Before you begin, gather the necessary materials and tools:

Metal quarter round trim

Miter saw or miter box

Nails or trim adhesive

Hammer or nail gun

Measuring tape

Pencil or chalk


1. Measure and mark the trim: Determine the length of trim needed and mark it on the trim using a measuring tape and pencil.

2. Cut the trim: Use a miter saw or miter box to cut the trim at a 45-degree angle. This angle will ensure a seamless join at the corners.

3. Miter corners: If you’re installing trim around a corner, you’ll need to cut two pieces of trim at 45-degree angles. Place the two pieces together and ensure they form a perfect 90-degree angle.

1. Prepare the surface: Remove any dirt or debris from the surface where you’ll be installing the trim. If necessary, use a sander or sandpaper to smooth the surface.

2. Apply nails or adhesive: If using nails, place small nails every 12-18 inches along the trim. If using trim adhesive, apply a thin layer to the back of the trim.

3. Install the trim: Position the trim in place and press it firmly against the surface. Use a level to ensure the trim is straight and level.

4. Secure the trim: Drive the nails or press the trim into the adhesive until it is securely attached.

1. Caulk the gaps: Apply a thin bead of caulk along the edges of the trim to fill any gaps and prevent moisture from seeping in.

2. Paint or stain the trim: If desired, paint or stain the trim to match the color of your walls or flooring.

3. Enjoy your finished project: Step back and admire your newly installed metal quarter round trim. It will add a touch of style and functionality to your home for years to come.

Leave a Reply

Your email address will not be published. Required fields are marked *

Partner with Niuyuan, Your OEM Edging Trim Factory!
Talk To Us



Foshan Nanhai Niuyuan Hardware Products Co., Ltd.

We are always providing our customers with reliable products and considerate services.

    If you would like to keep touch with us directly, please go to contact us


      • 1
        Hey friend! Welcome! Got a minute to chat?
      Online Service