Top 5 Mistakes to Avoid When Using Copper Tile Edge Trim

Copper tile edge trim is a beautiful and versatile way to finish the edges of your tiles. However, there are a few mistakes that you should avoid when using this type of trim. By following these tips, you can ensure that your tile edge trim looks its best and lasts for many years to come.

Not Cleaning the Surface Properly

One of the most important steps in installing copper tile edge trim is to clean the surface properly. This will help to ensure that the adhesive will bond properly and that the trim will stay in place. To clean the surface, use a mild detergent and water. Rinse the surface thoroughly and allow it to dry completely before installing the trim.

Using the Wrong Adhesive

Another mistake to avoid is using the wrong adhesive. Not all adhesives are created equal, and some are not suitable for use with copper tile edge trim. Be sure to choose an adhesive that is specifically designed for use with metal.

Not Applying the Adhesive Evenly

When applying the adhesive, be sure to do so evenly. This will help to ensure that the trim will stay in place and that it will not come loose over time. Use a notched trowel to apply the adhesive to the surface. The notches will help to create a strong bond between the adhesive and the trim.

Not Allowing the Adhesive to Dry Completely

Once you have applied the adhesive, be sure to allow it to dry completely before installing the trim. This will help to ensure that the trim will stay in place and that it will not come loose over time. The drying time will vary depending on the type of adhesive that you are using.

Not Sealing the Trim

Once the trim is installed, be sure to seal it. This will help to protect the trim from the elements and from wear and tear. Use a clear sealant that is specifically designed for use with copper.